sysctl === 时动态地修改内核的运行参数 ## 补充说明 **sysctl命令** 被用于在内核运行时动态地修改内核的运行参数，可用的内核参数在目录`/proc/sys`中。它包含一些TCP/ip堆栈和虚拟内存系统的高级选项， 这可以让有经验的管理员提高引人注目的系统性能。用sysctl可以读取设置超过五百个系统变量。 ### 语法 ```shell sysctl(选项)(参数) ``` ### 选项 ```shell -n：打印值时不打印关键字； -e：忽略未知关键字错误； -N：仅打印名称； -w：当改变sysctl设置时使用此项； -p：从配置文件“/etc/sysctl.conf”加载内核参数设置； -a：打印当前所有可用的内核参数变量和值； -A：以表格方式打印当前所有可用的内核参数变量和值。 ``` ### 参数 变量=值：设置内核参数对应的变量值。 ### 实例 查看所有可读变量： sysctl -a 读一个指定的变量，例如`kern.maxproc`： sysctl kern.maxproc kern.maxproc: 1044 要设置一个指定的变量，直接用`variable=value`这样的语法： ```shell sysctl kern.maxfiles=5000 kern.maxfiles: 2088 -> 5000 ``` 您可以使用sysctl修改系统变量，也可以通过编辑sysctl.conf文件来修改系统变量。sysctl.conf看起来很像rc.conf。它用`variable=value`的形式来设定值。指定的值在系统进入多用户模式之后被设定。并不是所有的变量都可以在这个模式下设定。 sysctl变量的设置通常是字符串、数字或者布尔型。（布尔型用 1 来表示'yes'，用 0 来表示'no'）。 ```shell sysctl -w kernel.sysrq=0 sysctl -w kernel.core_uses_pid=1 sysctl -w net.ipv4.conf.default.accept_redirects=0 sysctl -w net.ipv4.conf.default.accept_source_route=0 sysctl -w net.ipv4.conf.default.rp_filter=1 sysctl -w net.ipv4.tcp_syncookies=1 sysctl -w net.ipv4.tcp_max_syn_backlog=2048 sysctl -w net.ipv4.tcp_fin_timeout=30 sysctl -w net.ipv4.tcp_synack_retries=2 sysctl -w net.ipv4.tcp_keepalive_time=3600 sysctl -w net.ipv4.tcp_window_scaling=1 sysctl -w net.ipv4.tcp_sack=1 ``` ### 配置sysctl 编辑此文件：`/etc/sysctl.conf` 如果该文件为空，则输入以下内容，否则请根据情况自己做调整： ```shell # Controls source route verification # Default should work for all interfaces net.ipv4.conf.default.rp_filter = 1 # net.ipv4.conf.all.rp_filter = 1 # net.ipv4.conf.lo.rp_filter = 1 # net.ipv4.conf.eth0.rp_filter = 1 # Disables IP source routing # Default should work for all interfaces net.ipv4.conf.default.accept_source_route = 0 # net.ipv4.conf.all.accept_source_route = 0 # net.ipv4.conf.lo.accept_source_route = 0 # net.ipv4.conf.eth0.accept_source_route = 0 # Controls the System Request debugging functionality of the kernel kernel.sysrq = 0 # Controls whether core dumps will append the PID to the core filename. # Useful for debugging multi-threaded applications. kernel.core_uses_pid = 1 # Increase maximum amount of memory allocated to shm # Only uncomment if needed! # kernel.shmmax = 67108864 # Disable ICMP Redirect Acceptance # Default should work for all interfaces net.ipv4.conf.default.accept_redirects = 0 # net.ipv4.conf.all.accept_redirects = 0 # net.ipv4.conf.lo.accept_redirects = 0 # net.ipv4.conf.eth0.accept_redirects = 0 # enable Log Spoofed Packets, Source Routed Packets, Redirect Packets # Default should work for all interfaces net.ipv4.conf.default.log_martians = 1 # net.ipv4.conf.all.log_martians = 1 # net.ipv4.conf.lo.log_martians = 1 # net.ipv4.conf.eth0.log_martians = 1 # Decrease the time default value for tcp_fin_timeout connection net.ipv4.tcp_fin_timeout = 25 # Decrease the time default value for tcp_keepalive_time connection net.ipv4.tcp_keepalive_time = 1200 # Turn on the tcp_window_scaling net.ipv4.tcp_window_scaling = 1 # Turn on the tcp_sack net.ipv4.tcp_sack = 1 # tcp_fack should be on because of sack net.ipv4.tcp_fack = 1 # Turn on the tcp_timestamps net.ipv4.tcp_timestamps = 1 # Enable TCP SYN Cookie Protection net.ipv4.tcp_syncookies = 1 # Enable ignoring broadcasts request net.ipv4.icmp_echo_ignore_broadcasts = 1 # Enable bad error message Protection net.ipv4.icmp_ignore_bogus_error_responses = 1 # make more local ports available # net.ipv4.ip_local_port_range = 1024 65000 # set TCP Re-Ordering value in kernel to ‘5′ net.ipv4.tcp_reordering = 5 # Lower syn retry rates net.ipv4.tcp_synack_retries = 2 net.ipv4.tcp_syn_retries = 3 # Set Max SYN Backlog to ‘2048′ net.ipv4.tcp_max_syn_backlog = 2048 # Various Settings net.core.netdev_max_backlog = 1024 # Increase the maximum number of skb-heads to be cached net.core.hot_list_length = 256 # Increase the tcp-time-wait buckets pool size net.ipv4.tcp_max_tw_buckets = 360000 # This will increase the amount of memory available for socket input/output queues net.core.rmem_default = 65535 net.core.rmem_max = 8388608 net.ipv4.tcp_rmem = 4096 87380 8388608 net.core.wmem_default = 65535 net.core.wmem_max = 8388608 net.ipv4.tcp_wmem = 4096 65535 8388608 net.ipv4.tcp_mem = 8388608 8388608 8388608 net.core.optmem_max = 40960 ``` 如果希望屏蔽别人 ping 你的主机，则加入以下代码： ```shell # Disable ping requests net.ipv4.icmp_echo_ignore_all = 1 ``` 编辑完成后，请执行以下命令使变动立即生效： ```shell /sbin/sysctl -p /sbin/sysctl -w net.ipv4.route.flush=1 ```